How to Install Graphics on Sur Ron, Talaria, Segway, and Stark Varg Bikes
Upgrade your bike with our graphics kit for Sur-Ron Light Bee X, Sur-Ron Ultra Bee, Sur-Ron Storm Bee, Segway x160, Segway x260, Talaria Sting, Stark Varg, designed to provide both style and protection. Whether you're looking for custom decals, high-quality bike stickers, or a full wrap graphics kit, this guide will help you install them like a pro.
Why Install Decals on Your Sur Ron, Talaria, Segway, or Stark Varg?
Personalization: Stand out with a unique design that reflects your style.
Protection: Our 300-micron Nano Tech laminate (glossy or matte) prevents scratches, dirt, and wear.
Bubble-Free Application: Featuring easy installation with 3M adhesive.
Durability: Our graphics are UV-resistant, waterproof, and designed for extreme conditions.
Step-by-Step Guide to Installing Graphics Decals
Step 1: Gather Your Tools
To install your Sur Ron, Talaria, Segway, or Stark Varg graphics kit, you'll need:
Adhesive paper tape
Paper knife or scissors
Hairdryer or heat gun
Degreasing agent or isopropyl alcohol
Squeegee (optional)
Step 2: Prepare Your Bike’s Surface
1.Wash your hands – Clean hands prevent grease from interfering with adhesion.
2.Remove old decals – Use a hairdryer or heat gun to loosen the adhesive.
3.Clean thoroughly – Use isopropyl alcohol or a degreasing agent to remove dirt and residue.
4.Ensure a warm environment – Keep your bike at 20°C or warmer for best results.
Step 3: Plan the Placement
1.Lay out the decals before application to check alignment.
2.Use adhesive paper tape to hold decals in place before peeling.
3.Take a reference photo to ensure accurate placement.
Step 4: Apply the Graphics
1.Peel off half of the backing paper, then cut it off.
2.Press one side of the decal onto the bike, ensuring proper alignment.
3.Use your thumb or a squeegee to smooth out air bubbles from the center outward.
4.For curved areas, apply gentle heat with a hairdryer to make the decal more flexible.
5.If needed, trim excess material around bolts, vents, or access holes.
Step 5: Final Adjustments and Curing
1.Apply low heat over the decals to enhance adhesion.
2.Press down firmly to eliminate any remaining air pockets.
3.Let the bike sit for at least 24 hours before riding.
Common Mistakes to Avoid
Skipping surface cleaning – Dirt or grease will prevent proper adhesion.
Applying too much heat – Can stretch or damage the decal.
Not allowing curing time – Adhesive needs time to fully bond.
Get Your Custom Graphics Kit Today!
For more exclusive designs and to check out our full range, visit our collection here or our Etsy shop.
Trusted by Riders Worldwide
With hundreds of satisfied customers, our graphics kits are the perfect choice for riders who demand quality, durability, and style -Â @pureforstyle